HG Tile Grout Sealer and Protector 500ml

Product Code: 585050164

UPC Code: 8711577119492

Features : "HG tile grout sealer and protector • protects against dirt; grease and limescale HG tile grout sealer and protector forms a colourless; invisible barrier which protects grout joints against dirt; grease and scale. It is ideal for all wall and floor grout joints between tiles. HG tile grout sealer and protector is water based and has no scent. For use on all grouts joints between ceramic and porcelain wall and floor tiles. Do not use on epoxy grouting or grout between unglazed ceramic; nor on tiles with waxes or polishes. Coverage 500ml per 600-800M2 Directions for use: The grout joints must be both completely clean and dry. Allow new grouts to fully cure. Dirty grouting should be cleaned with HG tile grout cleaner; prior to using HG tile grout sealer and protector. HG scale away should be used to clean grouts between ceramic or porcelain tile; to remove limescale and rust deposits. DO NOT apply and avoid spills on marble; limestone and travertine surfaces. Allow cleaned grouting to dry for at least 24 hours; before applying HG tile grout sealer and protector with a brush or applicator. While applying; wipe up any spills as you go with a paper towel or cloth. If not all product has penetrated in the grout 10 minutes after application; remove this surplus immediately with a clean; lint free cloth. If all grout protector was soaked up after first application; apply a second coat; allowing 1 hour drying after first coat. Again remove any possible surplus within 10 minutes after application. Allow to dry for 3 hours before any foot traffic; and 12 hours before cleaning or liquid spills. Attention: Transport and store the bottle upright. "
Brand Name : HG
Volume (cm³) : 954.81